Faucets and Shanks

Stainless Steel Faucet Spring For Intertap Faucets Use this in between your Faucet and Shank to ensure that your faucet closes all the way, automat...

Stainless Steel Forward Sealing Draft Beer and Wine Faucet The patented Stainless Steel Intertap Faucet is a forward sealing faucet similar to the...

Stainless Steel Growler Fill Attatchement For Intertap Faucets With Intertaps modular design, it's easy to pull the nozzle and attach these cool pa...

Description All Stainless Steel construction Elbow Shank for installing into draft towers or around tight corners.  Comes complete with a welded 1/...

Create a taphandle of your very own and mount it with this easy to use threaded insert. Just drill a 1/2" hole in the bottom of your wooden piece a...

Description Bulk Head Fitting for any Jockey Box or cooler.  These pass through wall shanks are ideal for building your jockey box out of any coole...

This is a dual sided screw, one that goes into the ferrule and the other is a wood screw for going into a wood tap handle. 5/16 - 18 thread, total ...

Description Flanged Locknut for Shank. This nut is standard beer thread, and is made for the inside of your shank to lock it against the interior w...

Description Standard brass chrome plated faucet, ideal for jockey box construction, or as a cost effective way to build your own kegerater.  

Replacement gaskets and o-rings for intertap faucets. Will work with stainless steel and plated chrome faucets. Does not work with Intertap Flow-Co...

Description This 4-1/8" x 1/4" Bore Shank is 100% Stainless Steel, a perfect and permanent fixture in your kegerator or keezer. For best results, u...

The Silver Ferrule that goes on the bottom of a tap handle. Use with the 5/16" Hangar bolt to make your own tap handle, or fix one up!   Note: 5/16...

Description The second washer of the 2 part set used to allow motion of the lever in a standard faucet.

Description This Stainless Steel Special Jockey Box Shank is made specifically for jockey box construction.  The bore is size is 5/16" so that you ...

Description Faucet Coupling Nut Replacement Set includes the coupling nut, shank sleeve and shank snap ring.  This is the nut that you attach your ...

Description Use these Wing Nuts in place of 1" Hex Nuts for Sanke Taps and for shanks.  They are easy to put on and take off, and provide a level o...

Description This 3-1/8" x 1/4" Bore Shank is 100% Stainless Steel, a perfect and permanent fixture in your kegerator or keezer. For best results, u...

Description A COMPLETELY stainless steel faucet, ready for anything you can throw at it. No chrome plating, no brass, just high quality, food grade...

Stainless lever replacement for your faucet. These are great for replacing broken brass levers, as they will not corrode, and are more hearty.

Stainless Steel Stout Attachement for Intertap Faucets With Intertaps modular design, it's easy to pull the nozzle and attach these cool parts! Thi...

Single Faucet, All Stainless Steel Draft Tower made by Intertap.  Complete setup including: - SS Draft Tower - Intertap SS Faucet(s) - SS Faucet Sh...

Stainless Steel Ball Lock Adapter for Intertap Faucets With Intertaps modular design, it's easy to pull the nozzle and attach these cool parts! Thi...

Chrome Standard Faucet Friction Bonnet This piece sits between the Faucet and the Faucet Knob Lever Collar. It creates the friction when opening an...

A standard black faucet knob, great for a classy and easy look for your taps. Fits any standard faucet.